Brother IntelliFax-2840 User Manual

22
3
How to load
documents
3
You can send a fax, make copies, and scan
from the ADF (Automatic Document Feeder).
Note
The scan feature is available for
MFC-7240.
Using the automatic
document feeder (ADF) 3
The ADF can hold up to 20 pages and feeds
each sheet individually. Use standard
20 lb (80 g/m
2
) paper and always fan the
pages before putting them in the ADF.
The ADF can hold up to 30 pages, if you
stagger the pages and meet the following
conditions:
Temperature: 68° F - 86° F (20° - 30°C)
Humidity: 50% - 70%
Paper: Xerox 4200 or Xerox 4024
(20 lb/Letter)
Document Sizes Supported 3
Important
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper-
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
• To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
Note
Make sure documents with correction fluid
or written with ink are completely dry.
How to load documents 3
a Unfold the ADF document support (1)
and the ADF document output support
flap (2).
b Fan the pages well.
Loading documents 3
Length: 5.8 to 14 in. (147.3 to 355.6 mm)
Width: 5.8 to 8.5 in. (147.3 to 215.9 mm)
Weight:
17 to 24 lb (64 to 90 g/m
2
)
1
2

Brother IntelliFax-2840 Specifications

General

Print Technology	Laser
Fax Modem Speed	33.6 Kbps
Standard Memory	16 MB
Paper Capacity	250 sheets
Maximum Fax Resolution	203 x 392 dpi
Memory Transmission	Yes
Out-of-Paper Reception	Up to 400 pages
Print Resolution	2400 x 600 dpi
Copier Function	Yes
Copy Resolution	600 x 600 dpi
Telephone Handset	No
Caller ID	Yes
Fax Forwarding	Yes
Reduction/Enlargement	50% to 200%
Broadcasting	272 locations
Transmission Speed	Approximately 2.5 seconds per page
Copy Speed	21 cpm (copies per minute)
Print Speed	21 ppm (pages per minute)