Brother IntelliFax-2840 User Manual

47
11
11
Before scanning 11
To use the machine as a scanner, install a scanner driver.
Install the scanner drivers from the Installer CD-ROM. (See Quick Setup Guide: Install MFL-Pro
Suite.)
Note
(For FAX-2940)
You can download the scanner driver without the Brother ControlCenter from the Brother
Solutions Center at http://solutions.brother.com/.
Please note that FAX-2940 does not support the scanning function for Mac OS X 10.5.8 users.
Scanning a document as a PDF file using
ControlCenter4 (Windows
®
) 11
(For detailed information, see Software User’s Guide: Scanning.)
Note
The screens on your PC may vary depending on your model.
ControlCenter4 is a software utility that lets you quickly and easily access the applications you use
most often. Using ControlCenter4 eliminates the need to manually launch specific applications.
You can use ControlCenter4 on your computer.
a Load your document. (See How to load documents uu page 22.)
b Open ControlCenter4 by clicking Start/All Programs/Brother/XXX-XXXX (where XXX-
XXXX is your model name)/ControlCenter4. The ControlCenter4 application will open.
How to scan to a computer
(MFC-7240 only)
11

Brother IntelliFax-2840 Specifications

General

Print Technology	Laser
Fax Modem Speed	33.6 Kbps
Standard Memory	16 MB
Paper Capacity	250 sheets
Maximum Fax Resolution	203 x 392 dpi
Memory Transmission	Yes
Out-of-Paper Reception	Up to 400 pages
Print Resolution	2400 x 600 dpi
Copier Function	Yes
Copy Resolution	600 x 600 dpi
Telephone Handset	No
Caller ID	Yes
Fax Forwarding	Yes
Reduction/Enlargement	50% to 200%
Broadcasting	272 locations
Transmission Speed	Approximately 2.5 seconds per page
Copy Speed	21 cpm (copies per minute)
Print Speed	21 ppm (pages per minute)