16. OPTIONAL PARTS
66
KE-436C
16. OPTIONAL PARTS
Two-step foot switch
This is a pedal-type foot switch.
Liquid cooling tank
This helps to prevent thread breakages caused by friction when
using synthetic threads.
Fill the tank with silicone oil (100 mm
2
/s).
Three-pedal foot switch
The switch has an independent left work clamp switch (left side),
right work clamp switch (center) and start switch (right side).
Work clamp plate, OT
Use according to particular sewing needs in order to provide an
even clamping force.
Programmer assy
Used to create sewing patterns for the KE-436C. It can also be used
to display error messages.
Thread breakage detector device
Available as rotary type or fiber type, stops sewing when a thread
breakage is detected and warns the operator.
Needle cooler device
This is a pneumatic-type needle cooler which prevents the thread
breaking due to heat. It is particularly useful when sewing thicker
materials at high sewing speeds.
Air wiper device
The thread wiper is driven by a pneumatic cylinder.
2-step thread tension device
Allows the upper thread tension to be switched between two
settings at any position desired by using the programmer.
*Refer to the separate Parts Book for details.
To Next Page
Loading...
Need help?
General
