Brother MFC-5460CN User Manual

Troubleshooting and Routine Maintenance
107
Printing Received Faxes
Difficulty Suggestions
Condensed print and white streaks
across the page or the top and
bottom of sentences are cut off.
You probably had a bad connection, with static or interference on the telephone
line. Ask the other party to send the fax again.
Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
Received colour fax prints only in
black and white.
Replace the colour ink cartridges that are empty or nearly empty, and then ask the
other person to send the colour fax again. (See Replacing the ink
cartridges on page 119.)
Left and Right margins are cut off or
a single page is printed on two
pages.
Turn on Auto Reduction. (See Printing a reduced incoming fax on page 40.)
Phone Line or Connections
Difficulty Suggestions
Dialling does not work. (No dial
tone)
Check that the machine is plugged in and switched on.
Check all line cord connections.
Change Tone/Pulse setting. (See the Quick Setup Guide.) (Not available in New
Zealand.)
Lift the external phone’s handset, (on the machine’s handset or cordless handset
if available), and then dial the number to send a manual fax.
Wait to hear fax receiving tone before pressing Mono Start or Colour Start.
The machine does not answer
when called.
Check all line cord connections.
Make sure the machine is in the correct receiving mode for your setup.
(See Choosing the Receive Mode on page 37.) Check for a dial tone. If possible,
call your machine to hear it answer. If there is still no answer, check the telephone
line cord connection. If there is no ringing when you call your machine, ask your
telephone company to check the line.
Receiving Faxes
Difficulty Suggestions
Cannot receive a fax Check all line cord connections.
Make sure the machine is in the correct receiving mode for your setup.
(See Receive modes on page 37.)
If you often have interference on the phone line, try changing the menu setting of
Compatibility to Basic or Normal. (See Compatibility on page 118.)

Brother MFC-5460CN Specifications

General

I/O ports	1x USB 1x RJ-45
Scan speed	4 sec/page
Network ready	Yes
Scan file formats	BMP, PDF, PNG, TIFF
Dimensions (WxDxH)	440 x 395 x 226 mm
Networking features	10/100Base-TX
All-in-one functions	Fax, Scan
Standard media sizes	A4, LTR, LGL, EXE, A5, A6, 10x15cm
Media types supported	Plain paper, Inkjet, Glossy, Transparent
Color all-in-one functions	copy, fax, print, scan
Print technology	Inkjet
Maximum resolution	6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	30 ppm
Print speed (color, normal quality, A4/US Letter)	25 ppm
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Digital sender	No
Number of print cartridges	4
Scan to	E-mail, file, image, OCR
Scanner type	Flatbed scanner
Grayscale levels	256
Input color depth	48 bit
Copier resize	25 - 400 %
Maximum copy resolution	1200 x 1200 DPI
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	22 cpm
Copy speed (color, normal quality, A4)	20 cpm
Faxing	Color faxing
Fax memory	400 pages
Modem speed	33.6 Kbit/s
Fax coding methods	JPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)	100
Total input capacity	100 sheets
Total output capacity	50 sheets
Auto document feeder (ADF) input capacity	35 sheets
Display	LCD
Market positioning	Home & office
Compatible memory cards	CF, MMC, MS Pro, SD, xD
Standard interfaces	Ethernet, USB 2.0
Bundled software	Brother MFL-Pro Suite Brother ControlCentre 3 ScanSoft Paperport SE + OCR Brother ControlCentre 2 NewSoft Presto! PageManager7
Package weight	13200 g