Brother MFC-5460CN User Manual

Chapter 5
34
Dual access
(Monochrome only) 5
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message appears
while scanning documents, press
Stop/Exit to cancel or Mono Start to send
the pages scanned so far.
Real time transmission 5
When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the phone line is
free, the machine will start dialling and
sending.
If the memory is full or you are sending a
colour fax, the machine will send the
document in real time (even if
Real Time TX is set to Off).
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax Only for the next fax only.
Note
In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
Sending in real time for all faxes 5
a Make sure you are in Fax mode .
b Press Menu, 2, 2, 5.
Setup Send
5.Real Time TX
c Press a or b to choose On or Off.
Press OK.
Sending in real time for the next fax
only 5
a Make sure you are in Fax mode .
b Press Menu, 2, 2, 5.
c Press a or b to choose
Next Fax Only. Press OK.
d Press a or b to choose On (or Off).
Press OK.
Overseas Mode 5
If you are having difficulty sending a fax
overseas due to possible interference on the
phone line, we recommend that you turn on
the Overseas mode. After you send a fax
using this feature, the feature will turn itself
off.
a Make sure you are in Fax mode .
b Load your document.
c Press Menu, 2, 2, 7.
d Press a or b to choose On (or Off).
Press OK.

Brother MFC-5460CN Specifications

General

I/O ports	1x USB 1x RJ-45
Scan speed	4 sec/page
Network ready	Yes
Scan file formats	BMP, PDF, PNG, TIFF
Dimensions (WxDxH)	440 x 395 x 226 mm
Networking features	10/100Base-TX
All-in-one functions	Fax, Scan
Standard media sizes	A4, LTR, LGL, EXE, A5, A6, 10x15cm
Media types supported	Plain paper, Inkjet, Glossy, Transparent
Color all-in-one functions	copy, fax, print, scan
Print technology	Inkjet
Maximum resolution	6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	30 ppm
Print speed (color, normal quality, A4/US Letter)	25 ppm
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Digital sender	No
Number of print cartridges	4
Scan to	E-mail, file, image, OCR
Scanner type	Flatbed scanner
Grayscale levels	256
Input color depth	48 bit
Copier resize	25 - 400 %
Maximum copy resolution	1200 x 1200 DPI
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	22 cpm
Copy speed (color, normal quality, A4)	20 cpm
Faxing	Color faxing
Fax memory	400 pages
Modem speed	33.6 Kbit/s
Fax coding methods	JPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)	100
Total input capacity	100 sheets
Total output capacity	50 sheets
Auto document feeder (ADF) input capacity	35 sheets
Display	LCD
Market positioning	Home & office
Compatible memory cards	CF, MMC, MS Pro, SD, xD
Standard interfaces	Ethernet, USB 2.0
Bundled software	Brother MFL-Pro Suite Brother ControlCentre 3 ScanSoft Paperport SE + OCR Brother ControlCentre 2 NewSoft Presto! PageManager7
Package weight	13200 g