Brother MFC-5460CN User Manual

Sending a fax
31
5
Faxing Letter size documents
from the scanner glass 5
When documents are Letter size, you need to
set Scan Size to Letter. If you do not, the side
portion of the faxes will be missing.
a Make sure you are in Fax mode .
b Press Menu, 2, 2, 0.
c Press a or b to choose Letter.
Press OK.
Colour fax transmission 5
Your machine can send a colour fax to
machines that support this feature.
However, colour faxes cannot be stored in
the memory. When you send a colour fax, the
machine will send it in real time (even if
Real Time TX is set to Off).
Cancelling a fax in progress 5
If you want to cancel a fax while the machine
is scanning, dialling or sending, press
Stop/Exit.
Broadcasting
(Monochrome only)
5
Broadcasting is when the same fax message is
automatically sent to more than one fax number.
You can include Groups (See
page 55 .),
Speed-Dial numbers and up to 50 manually
dialled numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
a Make sure you are in Fax mode .
b Load your document.
c Enter a number. Press OK.
You can use either a Speed-Dial, a
Group, or a manually entered number
using the dial pad.
d Repeat step c until you have entered
all the fax numbers you wish to
broadcast to.
e Press Mono Start.
Note
• If you did not use up any of the numbers
for Groups or access codes or credit card
numbers, you can ‘broadcast’ faxes to as
many as 150 different numbers.
• The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for broadcasting.
If you broadcast to the maximum numbers
available, you will not be able to use dual
access (See page 34.).
• Enter the long dialling sequence numbers
as you would normally, but remember that
each Speed-Dial number counts as one
number, so the number of locations you
can store becomes limited.
• If the memory is full, press Stop/Exit to
stop the job. If more than one page has
been scanned, press Mono Start to send
the portion that is in the memory.

Brother MFC-5460CN Specifications

General

I/O ports	1x USB 1x RJ-45
Scan speed	4 sec/page
Network ready	Yes
Scan file formats	BMP, PDF, PNG, TIFF
Dimensions (WxDxH)	440 x 395 x 226 mm
Networking features	10/100Base-TX
All-in-one functions	Fax, Scan
Standard media sizes	A4, LTR, LGL, EXE, A5, A6, 10x15cm
Media types supported	Plain paper, Inkjet, Glossy, Transparent
Color all-in-one functions	copy, fax, print, scan
Print technology	Inkjet
Maximum resolution	6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	30 ppm
Print speed (color, normal quality, A4/US Letter)	25 ppm
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Digital sender	No
Number of print cartridges	4
Scan to	E-mail, file, image, OCR
Scanner type	Flatbed scanner
Grayscale levels	256
Input color depth	48 bit
Copier resize	25 - 400 %
Maximum copy resolution	1200 x 1200 DPI
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	22 cpm
Copy speed (color, normal quality, A4)	20 cpm
Faxing	Color faxing
Fax memory	400 pages
Modem speed	33.6 Kbit/s
Fax coding methods	JPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)	100
Total input capacity	100 sheets
Total output capacity	50 sheets
Auto document feeder (ADF) input capacity	35 sheets
Display	LCD
Market positioning	Home & office
Compatible memory cards	CF, MMC, MS Pro, SD, xD
Standard interfaces	Ethernet, USB 2.0
Bundled software	Brother MFL-Pro Suite Brother ControlCentre 3 ScanSoft Paperport SE + OCR Brother ControlCentre 2 NewSoft Presto! PageManager7
Package weight	13200 g