Brother MFC-5460CN User Manual

114
Transferring your faxes or Fax
Journal report B
If the LCD shows:
Change Unable XX
Clean Unable XX
Init Unable XX
Print Unable XX
Scan Unable XX
We recommend transferring your faxes to
another fax machine or to your PC. (See
Transferring faxes to another fax
machine on page 114 or Transferring faxes
to your PC on page 115.)
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring Fax Journal report
to another fax machine on page 115.)
Note
If there is an error message on the
machine's LCD, after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.
Transferring faxes to another fax
machine B
If you have not set up your Station ID (See
Quick Setup Guide.), you cannot enter fax
transfer mode.
a Press Menu, 9, 0, 1.
b Do one of the following:
 If the LCD shows No Data, there
are no faxes left in the machine's
memory.
Press Stop/Exit.
 If the LCD shows Enter Fax No.,
enter the fax number to which faxes
will be forwarded.
c Press Mono Start.
Scan Unable
XX
The machine has a mechanical
problem.
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
Open the scanner cover and remove any foreign
objects inside the machine.
If the error message continues, see Transferring
your faxes or Fax Journal report on page 114
before disconnecting the machine so you will not
lose any important messages. Then, disconnect
the machine from the power for several minutes
and then reconnect it.
Wrong Paper
Size
Paper is not the correct size. Load the correct size of paper (Letter, Legal or
A4), and then press Mono Start or
Colour Start.
Wrong USB device A non-PictBridge compatible or
broken device has been connected
to the PictBridge port.
Unplug the device from the PictBridge port, then
press Power Save to turn the machine off and
then on again.
Error Message Cause Action

Brother MFC-5460CN Specifications

General

I/O ports	1x USB 1x RJ-45
Scan speed	4 sec/page
Network ready	Yes
Scan file formats	BMP, PDF, PNG, TIFF
Dimensions (WxDxH)	440 x 395 x 226 mm
Networking features	10/100Base-TX
All-in-one functions	Fax, Scan
Standard media sizes	A4, LTR, LGL, EXE, A5, A6, 10x15cm
Media types supported	Plain paper, Inkjet, Glossy, Transparent
Color all-in-one functions	copy, fax, print, scan
Print technology	Inkjet
Maximum resolution	6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	30 ppm
Print speed (color, normal quality, A4/US Letter)	25 ppm
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Digital sender	No
Number of print cartridges	4
Scan to	E-mail, file, image, OCR
Scanner type	Flatbed scanner
Grayscale levels	256
Input color depth	48 bit
Copier resize	25 - 400 %
Maximum copy resolution	1200 x 1200 DPI
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	22 cpm
Copy speed (color, normal quality, A4)	20 cpm
Faxing	Color faxing
Fax memory	400 pages
Modem speed	33.6 Kbit/s
Fax coding methods	JPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)	100
Total input capacity	100 sheets
Total output capacity	50 sheets
Auto document feeder (ADF) input capacity	35 sheets
Display	LCD
Market positioning	Home & office
Compatible memory cards	CF, MMC, MS Pro, SD, xD
Standard interfaces	Ethernet, USB 2.0
Bundled software	Brother MFL-Pro Suite Brother ControlCentre 3 ScanSoft Paperport SE + OCR Brother ControlCentre 2 NewSoft Presto! PageManager7
Package weight	13200 g