EasyManuals Logo
Home>Brother>All in One Printer>MFC-7365DN

Brother MFC-7365DN Advanced User's Guide

Brother MFC-7365DN
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
63
B
This is a comprehensive list of features and terms that appear in Brother manuals. Availability of
these features depends on the model you purchased.
B
Glossary B
ADF (automatic document feeder)
The document can be placed in the ADF
and scanned one page at a time
automatically.
Address Book
A pre-programmed number for easy dialing.
You must press (Address Book), then
enter the three digit Speed Dial location
and press Start to begin the dialing
process.
An electronic, alphabetical listing of stored
One Touch, Speed Dial and Group
numbers.
Auto Reduction
Reduces the size of incoming faxes.
Automatic fax transmission
Sending a fax without picking up the
handset of the external telephone or
pressing Hook.
Automatic Redial
A feature that enables your machine to
redial the last fax number after five
minutes, if the fax did not go through
because the line was busy.
Backup Print
Your machine prints a copy of every fax
that is received and stored in memory.
This is a safety feature so you will not lose
messages during a power failure.
Batch Transmission
As a cost saving feature, all delayed faxes
to the same fax number will be sent as one
transmission.
Beeper Volume
Volume setting for the beep when you
press a key or make an error.
Broadcasting
The ability to send the same fax message
to more than one location.
Cancel Job
Cancels a programmed print job and
clears the machine’s memory.
CNG tones
The special tones (beeps) sent by fax
machines during automatic transmission
to tell the receiving machine that a fax
machine is calling.
Coding method
Method of coding the information
contained in the document. All fax
machines must use a minimum standard
of Modified Huffman (MH). Your machine
is capable of greater compression
methods, Modified Read (MR), Modified
Modified Read (MMR) and JBIG, if the
receiving machine has the same
capability.
Communication error (or Comm. Error)
An error during fax sending or receiving,
usually caused by line noise or static.
Compatibility group
The ability of one fax unit to communicate
with another. Compatibility is assured
between ITU-T Groups.
Contrast
Setting to compensate for dark or light
documents, by making faxes or copies of
dark documents lighter and light
documents darker.
Delayed Fax
Sends your fax at a specified later time
that day.

Table of Contents

Other manuals for Brother MFC-7365DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-7365DN and is the answer not in the manual?

Brother MFC-7365DN Specifications

Printing Specifications IconPrinting Specifications
print technologyElectrophotographic Laser
print speedUp to 24ppm
print resolutionUp to 1200 x 600 dpi
Copying Specifications IconCopying Specifications
copy speedUp to 24cpm
copy resolution600 x 600 dpi
copy reduction/enlargement25% - 400% in 1% increments
Scanning Specifications IconScanning Specifications
scanner typeColor Flatbed with ADF
document glass size8.5” x 11” (letter)
scan resolutionOptical: Up to 600 x 2400 dpi
Paper Handling IconPaper Handling
paper size maximumUp to 8.5” x 14” (legal size)
paper input capacity maximum250-sheet capacity paper tray, single-sheet manual feed slot
output capacity maximum100 sheets (face down), 1 sheet (face up)
Weight and Dimensions IconWeight and Dimensions
unit dimensions15.9” W x 15.7” D x 12.4” H
unit weight25.6 lbs.
carton weight32.6 lbs.
carton dimensions20.7” W x 20.1” D x 19.4” H

Related product manuals