Home > Scan > Scan from Your Computer (Macintosh) > Scan Using Presto! PageManager or other
TWAIN-Compliant Applications (Macintosh)
Scan Using Presto! PageManager or other TWAIN-Compliant
Applications (Macintosh)
• Download Presto! PageManager from http://nj.newsoft.com.tw/download/brother/
PM9SEInstaller_BR_multilang2.dmg.
• Your hard disk drive must have at least 400 MB of free disk space for installation.
• Presto! PageManager supports OS X v10.8.5, 10.9.x, 10.10.x.
• For more information about the application, see the Presto! PageManager help file. You can access this from
the Presto! PageManager Help menu.
Follow these steps if you are using Presto! PageManager. Instructions for using other applications that
support TWAIN specifications are very similar to the steps that follow.
1. Start Presto! PageManager.
The first time you use the Brother TWAIN driver, you must set it as the default driver. To set the Brother
TWAIN driver as the default driver, do the following:
a. Click the File menu, and then select the Import from Scanner option.
b. Select the Brother TWAIN option.
2. Click the File menu, and then select the Acquire Image Data option.
The scanner setup dialog box appears.
3. Change the scan settings, such as Resolution, Scan Type, or Adjust Image, if needed.
4. Click the Document Size pop-up menu, and then select your document size.
5. Click the PreScan option to preview your image and crop unwanted portions before scanning.
• After you select a document size, adjust the scanning area by holding down the mouse button and
dragging your mouse pointer over the portion you want to scan.
• To scan both sides of the document (MFC-8540DN):
Automatic 2-sided scan is available only when using the ADF.
You cannot adjust the scanning area.
You cannot use PreScan to preview an image.
6. Click Start.
The machine starts scanning.
Related Information
• Scan from Your Computer (Macintosh)
196
To Next Page
Loading...
Need help?
General
