Brother MFC-8535DN User Manual

Level 1 Level 2 Level 3 Descriptions
Reset Printer
- - Restore the printer settings to the factory settings.
[All Settings] > [Network]
Level 1 Level 2 Level 3 Level 4 Descriptions
Wired LAN TCP/IP BOOT Method IP Boot
Tries
Select the BOOT method that
best suits your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
(up to 32 characters)
WINS
Configuration
- Select the WINS configuration
mode.
WINS Server Primary
Specify the IP address of the
primary WINS server.
Secondary
Specify the IP address of the
secondary WINS server.
DNS Server Primary
Specify the IP address of the
primary DNS server.
Secondary
Specify the IP address of the
secondary DNS server.
APIPA
- Set the machine to allocate the
IP address from the link-local
address range automatically.
IPv6
- Turn the IPv6 protocol on or off.
To use the IPv6 protocol, go to
the Brother Solutions Center at
support.brother.com for more
information.
Ethernet
- - Select the Ethernet link mode.
Wired
Status
- - View the current wired status.
MAC
Address
- - View the machine's MAC
address.
Set to
Default
- - Restore the wired network
settings to the factory settings.
NFC
(MFC-8540DN)
- - - Turn the NFC function on or off.
E-mail/IFAX
(Available after Internet Fax
(I-Fax) is downloaded)
Mail
Address
- - Enter the email address.
(Up to 60 characters)
Setup
Server
SMTP Server
Enter the SMTP server name and
address.
Port
Enter the SMTP port number.
Auth. for
SMTP
Select the Security method for
email notification.
SSL/TLS
Send or receive an email via an
email server that requires secure
SSL/TLS communication.
549

Brother MFC-8535DN Specifications

General

Brand	Brother
Model	MFC-8535DN
Category	All in One Printer
Language	English