96 Chapter 11
5
Reinstall the access plate and the rear cover, using the removed screws.
6
Reconnect the interface cable, and then plug the power cord into the AC mains outlet and switch
on.
Optional Paper Tray
You can purchase the Paper Tray accessory (LT400) to use as a third paper source. The paper tray
holds up to 250 sheets of 20 lb (75 m/g
2
) paper.
• Hold the memory board by its edges. Do not touch the surface of the
board.
• Make sure the memory board is securely seated in the main controller
board.
To Next Page
Loading...
Need help?
General
