Home > Copy > Copy an ID Card
Copy an ID Card
Use the [2in1(ID)] feature to copy both sides of an identification card onto one page, keeping the original
card size.
• Make sure the paper size is set to A4 or Letter.
• You may copy an identification card to the extent permitted under applicable laws. For more detailed
information, see the Product Safety Guide.
>> MFC-J2330DW
>> MFC-J2730DW
MFC-J2330DW
1. Place your identification card face down near the upper-left corner of the scanner glass.
a. 3 mm or greater (top, left)
b. 207 mm
c. 145 mm
d. scannable area
2. Press d or c to display
[2 in 1 ID Copy], and then press it.
3. Enter the number of copies in one of the following ways:
• Press [-] or [+] on the touchscreen.
• Press
to display the keyboard on the touchscreen, and then enter the number of copies using the
touchscreen keyboard. Press [OK].
• Enter the number of copies using the dial pad.
4. To change the copy settings, press [Options]. When finished, press [OK].
5. Press [Mono Start] or [Colour Start].
The machine starts scanning one side of the identification card.
6. After the machine has scanned the first side, turn over the identification card and press [Continue] to scan
the other side.
259
To Next Page
Loading...
Need help?
General
