2006/05/31
APPENDIX C HBP MODE COMMANDS - 13
4. RECOMMENDED COMMAND STRING
The command strings below shows the recommended command stream for two pages of a print job.
<Esc>%-12345X@PJL<LF> used for HL-820/1020/1040
@PJL DEFAULT AUTOSLEEP=0<LF> used for HL-820/1020/1040
@PJL DEFAULT TIMEOUTSLEEP= 15<LF> used for HL-820/1020/1040
<Esc>%-12345X@PJL<LF>
@PJL ENTER LANGUAGE = HBP<LF> Enter into HBP mode
@L<00H> Set 600 dpi resolution
@E<00H> Set economy mode off
@T<0FH> Set Sleep time to 15 minutes
@M<81H> Set mode
Error Print on
@J<00H><00H> Set the MediaType ( normal paper)
Thick paper : @J<00H><01H>]
@J<02H><00H> Normal Paper ( not Envelope)
Envelope [@J<02H><01H>]
@G<size(3byte)><data> 1 page of data (1st page)
@G+ <00H><00H><01H><FFH> white raster
@F Form feed ( 1st page)
@G<size(3byte)><data> 1 page of data (2nd page)
@G+ <00H><00H><01H><FFH> white raster
@F Form feed ( 2nd page)
@X Exit from HBP mode
To Next Page
Loading...
Need help?
General
