Printing
11
2
Printing the Printer Setup Information
2
You can use the (Print) button to print a report that lists the following printer settings:
Program version
Printer usage history
Missing dot test pattern
List of transferred data
Communication settings
• You can use [Device settings] of the “Printer Setting Tool” to set in advance, which items will
be printed. For more information, see Printer Information Report on page 29.
• The node name will also appear in the communication settings. The default node name
is “BRWxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is based on your printer’s MAC address/
Ethernet address.)
a Make sure that a roll of 58 mm wide receipt paper has been loaded, and the Media Roll
compartment top cover is closed.
b Turn the printer on.
c Hold down the (Print) button until the POWER indicator starts flashing green and
the printer setup information is printed.
• For printing the printer setup information, we recommend using 58 mm wide receipt paper.
The length required for printing differs depending on the information to be printed.
• The printer setup information can also be printed from [Device settings] of the “Printer Setting
Tool”. For more information, see Print Information Report on page 35.
To Next Page
Loading...
Need help?
General