External Connections 135
1 Connect the camcorder to the TV.
Refer to Connection Diagrams (
0 122). Select connection A or B to
enjoy high-definition playback.
2 Turn on the camcorder and set it to mode.
3 Turn on the DVD Burner and set it to Disc Playback mode.
s Refer to Playing DVDs.
4 Connect the camcorder to the DVD Burner using the supplied
USB cable.
• Connection D. Refer to Connection Diagrams (
0 124) and s
Connections.
• If the device type selection screen appears, touch [DVD Burner].
5 Insert the disc you want to play back into the DVD Burner.
• Use the OPEN/CLOSE button on the DVD Burner to open and close
the disc tray.
• After the disc is recognized, the disc's content will be displayed in an
index screen.
6 Select the scene you want to play back and touch it to start
playing it back.
IMPORTANT
• While the camcorder is connected to the DVD Burner, do not open the
double memory card slot cover and do not remove the memory cards.
NOTES
• Only AVCHD discs created with the DW-100 DVD Burner can be played
back using the DVD Burner.
• The camcorder’s menus cannot be accessed while the camcorder is
connected to the DVD Burner.
• With the exception of fast playback at 60x speed, special playback
modes (0 46) can be used also for disc playback.
To Next Page
Loading...
Need help?
General
