Canon EOS-1D Mark II Digial User Manual

18
For details on using the battery, refer to the instructions for the Ni-MH
Pack NP-E3 or Ni-MH Charger NC-E2.
1
Connect the power cord.
s The <POWER> lamp will light.
2
Detach the protective cover and
connect the battery.
¡Attach the cover to the battery
compartment cap and store it.
¡Whenever the battery is out of the
camera, be sure to attach the
protective cover to prevent a short
circuit.
Recharging the Battery

Canon EOS-1D Mark II Digial Specifications

General

Sensor Type	CMOS
Effective Pixels	8.2 megapixels
Sensor Size	28.7 x 19.1 mm
ISO Sensitivity	ISO 100-1600 (expandable to 50-3200)
Autofocus Points	45
Continuous Shooting Speed	8.5 fps
LCD Screen Size	2.0 inches
Weight	1220 g (body only)
Camera Type	Digital SLR
Image Resolution	3504 x 2336
Lens Mount	Canon EF
Viewfinder	Optical (pentaprism)
Battery	NP-E3
Dimensions	156 x 157.6 x 79.9 mm
LCD Screen Resolution	230, 000 pixels
Viewfinder Coverage	100%
Shutter Speed Range	30 - 1/8000 sec
Storage Media	CompactFlash (Type I or II)