Name: Canon EOS-1D Mark II Digial
Brand: Canon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

The image is recorded with the same ﬁle No., pixel count, and recording

quality in the same-numbered folder in both the CF card and SD card.

Select [BackUp].

¡Select the <c> tab.

¡Hold down the <X> button and

turn the <5> dial to select [BackUp].

Then let go of the button.

Select the desired setting.

¡Hold down the <X> button and

turn the <5> dial to select the setting.

Then let go of the button.

¡Either selection, h or j, will

record the same image onto both

cards.

Difference between h and j

After image capture, you can have the image displayed from the CF

card or SD card. Selecting h will display the image in the CF card,

and j will display the image in the SD card.

Using Both Memory Cards for Image Recording (Backup)

¡ To make it easier to ﬁnd back-up images, create a new folder and select

it.

¡ The number of remaining shots displayed on the top LCD panel will be

based on the memory card having less remaining capacity.

¡ In the back-up mode, a folder with the same number will be created

automatically in the CF card and SD card.

¡ If either one of the memory cards becomes full, shooting will not be

possible.

¡ You cannot move or copy images between the two cards.

Questions and Answers:

Need help?

Do you have a question about the Canon EOS-1D Mark II Digial and is the answer not in the manual?

Canon EOS-1D Mark II Digial Specifications

General