Canon EOS-1D Mark II Digial User Manual

22
With DC Coupler Kit DCK-E1, you can connect the camera to a
household power outlet and not worry about the battery level.
1
Insert the DC Coupler.
¡Insert the coupler and while pushing it
in, turn the release handle as shown
by the arrow.
2
Connect the DC plug.
3
Connect the power cord.
¡After you finish using the camera, set
the <4> switch to <2> and
disconnect the plug from the power
outlet.
Using a Household Power Outlet
¡ The DC Coupler is not water-resistant, so do not get it wet when using it
outdoors.
¡ When the <
4> switch is set to <1>, do not disconnect the DC plug or
AC adapter’s power cord from the power outlet. Otherwise, the camera
may stop operating. If the camera stops operating, remove the DC
Coupler from the camera and reinstall it.

Canon EOS-1D Mark II Digial Specifications

General

Sensor Type	CMOS
Effective Pixels	8.2 megapixels
Sensor Size	28.7 x 19.1 mm
ISO Sensitivity	ISO 100-1600 (expandable to 50-3200)
Autofocus Points	45
Continuous Shooting Speed	8.5 fps
LCD Screen Size	2.0 inches
Weight	1220 g (body only)
Camera Type	Digital SLR
Image Resolution	3504 x 2336
Lens Mount	Canon EF
Viewfinder	Optical (pentaprism)
Battery	NP-E3
Dimensions	156 x 157.6 x 79.9 mm
LCD Screen Resolution	230, 000 pixels
Viewfinder Coverage	100%
Shutter Speed Range	30 - 1/8000 sec
Storage Media	CompactFlash (Type I or II)