Handy Features
®_[Auto reset]: Resets the file numbering to 0001 whenever the
card is replaced°
Each time you replace the card, the file numbering restarts from
0001. This is convenient if you want to organize images according to
cards.
However, if the replacement card contains images recorded
previously, the file numbering of the new images might continue from
the file numbering of the existing images in the card. To restart the
file numbering from 0001, you should use a newly4ormatted card.
File numbering after replacing the card
File numbering is reset
®_[Manual reset]: You can reset the fiJe numbering to 0001 at any
time or for a new foJdero
When you reset the file numbering manually, a new folder is created
automatically and the file numbering of images saved to that folder
starts from 0001. This is convenient when you want to use different
folders for the images taken yesterday and the ones taken today, for
example. After the manual reset, the file numbering returns to
continuous or auto reset.
if foider No] 999 iS c_ea[edl [Feider number full] will aPPeai on the _CD
monitor. # that folder contains images reaching fib number 9999, shooting will
not be possibb even if the card sti!! has storage capacity. The LCD moni!o[ wi!l
display a message to replace the card, Rep!ace with a new card
_For both JPEG and RAW images, the file name Will Stait With IIMGL;' The
extension wi!! be !I_JPG'!for JPEG images and !'_CR2'[for RAW images,
111
To Next Page
Loading...
Need help?
General
Weight and Dimensions
