E,_ Transferring mmagesto a Personal Computer _j
By connecting the camera to a personal computer, you can transfer
images from the camera's card by operating the camera. This is called
direct image transfer.
Before connecting the camera to the personaJ computer, be
sure to install the bundled software (EOS DIGITAL Solution
DisklCD-ROM) in the personaJ computer. For instructions on
how to install the software, see "CD-ROM Guide/'
Preparation for image Transfer
Connect the camera to the
personal computer.
® Turn off the camera's power switch
before connecting it.
® Use the interface cable that came
with the camera=
•4,_ ® When connecting the cable plug to
the camera's <_:_ > terminal, the
cable plug's <_7 > icon must face the
front side of the camera=
® To the personal computer's USB port,
connect the plug on other end of the
cable.
2, et the camera's power switch to
<ON>.
® When the program selection screen
appears on the personal computer,
select [EOS Utility].
When the camera model selection
screen appears, select your camera's
model.
_y,,The [EOS UtiJity] screen will appear
on the computer, and the direct image
transfer screen will appear on the
camera's LCD monitor.
147
To Next Page
Loading...
Need help?
General
Weight and Dimensions
