112
Connecting to a TV
If the camera is set to the wrong video system format (→121), you will not see a
proper image on the TV set. Make sure the camera is set to the video system
format (NTSC or PAL) compatible with the TV set.
● Using a DC coupler is recommended. (→26)
● Images and menus do not appear on the LCD monitor while the video cable is
connected to the camera.
● You can also switch the TV video signal to PAL (→121). The default setting is for
the NTSC signal standard.
Video input terminal
You can connect the EOS D60 to a television (using the video cable provided with your
camera) to display your recorded images. Always turn off the camera and the television before
connecting or disconnecting them.
1
Open the cover.
2
Connect the cable.
● Connect the cable to the VIDEO OUT
terminal on the camera and to the video
input terminal on the TV.
● Insert the cable plug all the way, until it
clicks into place.
3
Turn the TV on, and set the input
switch to Video In.
4
Set the Main Switch to <ON>.
5
Press the < > button.
➡ The image appears on the TV screen.
● You can use the TV to view images or make
menu settings just as you would do with the
LCD monitor.
● When you finish, set the Main Switch to
<OFF>, turn the TV off, then disconnect the
video cable.
To Next Page
Loading...
Need help?
General
