20
Conventions Used in This Manual
● The procedures in this booklet assume that the camera has been turned on. Before
proceeding, be sure that the main switch is set to <ON> .
● In this manual, the <
> icon indicates the Main Dial.
● In this manual the <
> icon indicates the Quick Control Dial.
● In this manual the <
> icon indicates the SET button, used
to set menu functions and custom functions.
● The camera control icons and markings in this booklet correspond to the icons and
markings on the camera. See “Nomenclature” on page 14.
● Reference page numbers are indicated by (→✽✽) .
● The procedures in this instraction use a Canon EF 24-85mm f/3.5-4.5 USM lens for
reference.
● The descriptions also assume that the menu functions and custom functions are set to the
default settings.
● The icons (
4
), (
6
), and (
16
) indicate that the function operates on a timer, and remains
in effect after the button is released. The icons represent 4, 6, or 16 seconds respectively.
● In general, the pictures used for explaining procedures are taken with a single-lens reflex
camera using 35 mm film.
■ These Instructions use the following alert symbols:
: The Caution symbol indicates a warning to prevent shooting problems.
: The Note symbol gives supplemental information.
: The Light bulb symbol gives a helpful tip for operating your camera or taking
pictures.
: The Custom Function symbol indicates that there is a relevant Custom Function.
For details, see “Custom Functions” on page 122.
To Next Page
Loading...
Need help?
General
