Name: Canon EOS D60
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

115

Playing and Erasing Recorded Images

The imaging element corresponds to the film in a film camera. If dirt or foreign matter gets on

this imaging element, black spots may be recorded on the corresponding part of the image. If

this happens, use the procedure below to clean the imaging element.

Because the imaging element is very sensitive, we strongly recommend that you have the

cleaning done by Canon service representatives.

When cleaning the imaging element, always connect the EOS D60 camera to a household

power outlet using the DC coupler. If you try to clean the imaging element while the battery

pack is installed in the camera, the cleaning warning message “

” will blink on the LCD

panel and you will not be able to clean the imaging element.

Before you start cleaning, remove the lens. (→27)

Insert the DC coupler (→26) and set

the Main Switch to <ON>. (→28)

From the menu, select [C.Fn].

● Press the <

> button.

● Turn the <

> dial to select [C.Fn].

Press the < > button.

➡ The Custom Function Setting screen

appears.

Select [C.Fn-13].

● Turn the < > dial to select C.Fn-13

[Sensor cleaning ], then press the <

button.

Cleaning the CMOS Imaging Element

Other manuals for Canon EOS D60

Questions and Answers:

Need help?

Do you have a question about the Canon EOS D60 and is the answer not in the manual?

General