Canon EOS D60 User Manual

66
Custom White Balance Setting
Custom white balance lets you set the white balance yourself by photographing a white subject
to use as the basis for the camera’s white balance, and then selecting that picture for use as
white balance data.
1
Photograph a white subject.
● Take a picture of a white subject, just as
you would take a normal picture.
●
Frame the shot so that the white subject fills the
entire partial metering zone in the viewfinder.
● This picture can be taken using any mode (→16).
● Photograph a white subject so that a standard
exposure is obtained. If the picture is underex-
posed or overexposed, the correct white balance
might not be obtained.
2
From the menu, select [Custom
WB].
● Press the < MENU > button.
● Turn the < > dial to select [Custom WB],
then press the <
> button.
3
Select the image.
● Turn the < > dial to select the picture you
took in step 1, then press the <
> button.
● When the setting is entered, the screen
returns to the menu.
● Press the <
MENU > button to clear the
screen and exit the menu.
4
Press the <
AF
WB
> button. (
6
)
5
Select the white balance.
● Turn the < > dial to select < >.
➡ The custom white balance is entered.
Partial metering zone

Canon EOS D60 Specifications

General

Sensor Type	CMOS
Megapixels	6.3
ISO Range	100-1000
Autofocus Points	3
LCD Size	1.8"
Shutter Speed Range	30-1/4000 sec
Continuous Shooting Speed	3 fps
Weight	780 g
Camera Type	Digital SLR
Max Resolution	3072 x 2048
Image Ratio w:h	3:2
Sensor Size	22.7 x 15.1 mm
Lens Mount	Canon EF
Focal Length Mult.	1.6x
Storage Types	CompactFlash (Type I or II)
Battery	BP-511
Dimensions	150 x 107 x 75 mm
Viewfinder	Optical (pentamirror)