Canon EOS Rebel T6 User Manual

124
Due to the lens characteristics, the four corners of the picture may look
darker. This phenomenon is called lens light fall-off or drop in peripheral
illumination and can be corrected. The default setting is [Enable]. With
JPEG images, the correction is applied when the image is captured. For
RAW images, it can be corrected with Digital Photo Professional (EOS
software, p.314).
1
Select [Peripheral illumin.
correct.].
 Under the [z1] tab, select
[Peripheral illumin. correct.], then
press <0>.
2
Select the setting.
 Check that [Correction data
available] is displayed for the
attached lens.
 If [Correction data not available] is
displayed, see “Lens Correction Data”
on the next page.
 Select [Enable], then press <0>.
3
Take the picture.
 The image will be recorded with the
peripheral illumination corrected.
3 Correcting the Image’s Dark Corners
Correction disabled Correction enabled

Canon EOS Rebel T6 Specifications

General

Camera Type	Digital SLR
Sensor	CMOS
Effective Megapixels	18.0 MP
Sensor Size	22.3 x 14.9 mm
ISO Range	100-6400 (expandable to 12800)
Image Processor	DIGIC 4+
Autofocus Points	9
Continuous Shooting	3 fps
Viewfinder Type	Optical (pentamirror)
Viewfinder Coverage	95%
Screen Size	3.0 inches
Screen Resolution	920, 000 dots
Video Resolution	1920 x 1080 (Full HD)
Video Format	MOV (H.264)
Built-in Flash	Yes
Lens Mount	Canon EF/EF-S
Storage Media	SD/SDHC/SDXC
Connectivity	Wi-Fi, NFC
Battery	LP-E10
Battery Life	Approx. 500 shots
Shutter Speed	30-1/4000 sec
External Flash	Yes (Hot Shoe)
Dimensions	129.0 x 101.3 x 77.6 mm
Weight	485 g (body only)