Name: Canon EOS Rebel T6
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

184

You can prevent the beeper from sounding when focus is achieved or

during self-timer operation.

Under the [z1] tab, select [Beep], then

press <0>. Select [Disable], then press

<0>.

This setting prevents shooting if there is no card in the camera.

Under the [z1] tab, select [Release

shutter without card], then press <0>.

Select [Disable], then press <0>.

If there is no card inserted in the camera

and you press the shutter button, “Card”

will be displayed in the viewfinder, and

you cannot release the shutter.

You can set how long the image is displayed on the LCD monitor

immediately after shooting. If [Off] is set, the image will not be displayed

immediately after shooting. If [Hold] is set, the image review will be

displayed up until the [51: Auto power off] time has elapsed.

During image review, if you operate any camera controls such as

pressing the shutter button halfway, the image review will end.

Under the [z1] tab, select [Image

review], then press <0>. Select the

desired setting, then press <0>.

Handy Features

3 Disabling the Beeper

3 Card Reminder

3 Setting the Image Review Time

Other manuals for Canon EOS Rebel T6

Questions and Answers:

Need help?

Do you have a question about the Canon EOS Rebel T6 and is the answer not in the manual?

General