Name: Canon EOS Rebel T6
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Handy Features

192

Vertical images are rotated automatically so they

are displayed vertically on the camera’s LCD

monitor and on the computer instead of

horizontally. You can change the setting for this

feature.

Under the [51] tab, select [Auto rotate],

then press <0>. The available settings

are described below. Select the desired

setting, then press <0>.

 [OnzD]:

The vertical image is automatically rotated during playback

on both the camera’s LCD monitor and on the computer.

 [OnD]:The vertical image is automatically rotated only on the

computer.

 [Off] : The vertical image is not automatically rotated.

 The vertical image is not rotated during the image review

immediately after shooting.

Press the <x> button and the image playback will display the

rotated image.

 [OnzD] is set, but the image does not rotate during playback.

Auto rotate will not work with vertical images captured while [

Auto

rotate

] was set to [

Off

]. If the vertical image is taken while the camera

is pointed up or down, the image may not be rotated automatically for

playback. In such a case, see “Rotating the Image” on page 211.

 On the camera’s LCD monitor, I want to rotate an image

captured when [OnD] had been set.

Set [OnzD], then play back the image. It will be rotated.

 The vertical image does not rotate on the computer screen.

The software used is not compatible with image rotation. Use EOS

software instead.

3 Auto Rotation of Vertical Images

FAQ

Other manuals for Canon EOS Rebel T6

Questions and Answers:

Need help?

Do you have a question about the Canon EOS Rebel T6 and is the answer not in the manual?

General