Canon EOS Rebel T6 User Manual

36
Load a fully charged Battery Pack LP-E10 into the camera. You can use
an SD, SDHC, or SDXC memory card (sold separately) with the
camera. The captured images are recorded onto the card.
Make sure the card’s write-protect switch is set upward to
enable writing and erasing.
1
Open the cover.
 Slide the lever as shown by the
arrows and open the cover.
2
Insert the battery.
 Insert the end with the electrical
contacts.
 Insert the battery until it locks in
place.
3
Insert the card.
 As shown by the illustration, face
the card’s label side toward the
back of the camera and insert it
until it clicks in place.
4
Close the cover.
 Press the cover until it snaps shut.
 When you set the power switch to
<1>, the number of possible shots
(p.40) will be displayed on the LCD
monitor.
Installing and Removing the Battery and Card
Installing the Battery and Card
Write-protect switch

Canon EOS Rebel T6 Specifications

General

Camera Type	Digital SLR
Sensor	CMOS
Effective Megapixels	18.0 MP
Sensor Size	22.3 x 14.9 mm
ISO Range	100-6400 (expandable to 12800)
Image Processor	DIGIC 4+
Autofocus Points	9
Continuous Shooting	3 fps
Viewfinder Type	Optical (pentamirror)
Viewfinder Coverage	95%
Screen Size	3.0 inches
Screen Resolution	920, 000 dots
Video Resolution	1920 x 1080 (Full HD)
Video Format	MOV (H.264)
Built-in Flash	Yes
Lens Mount	Canon EF/EF-S
Storage Media	SD/SDHC/SDXC
Connectivity	Wi-Fi, NFC
Battery	LP-E10
Battery Life	Approx. 500 shots
Shutter Speed	30-1/4000 sec
External Flash	Yes (Hot Shoe)
Dimensions	129.0 x 101.3 x 77.6 mm
Weight	485 g (body only)