Name: Canon EOS Rebel T6
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

3 Custom Function SettingsN

262

C.Fn II: Image

C.Fn-4 Long Exposure Noise Reduction

0: Off

1: Auto

For exposures of 1 sec. or longer, noise reduction is performed

automatically if noise typical of long exposures is detected. This

[Auto] setting is effective in most cases.

2: On

Noise reduction is performed for all exposures of 1 sec. or longer.

The [2: On] setting may reduce noise that cannot be detected with

the [1: Auto] setting.

 With settings 1 and 2, after the picture is taken, the noise reduction

process may take the same amount of time as the exposure. You cannot

take another picture until the noise reduction process is completed.

 At ISO 1600 or higher, noise may be more pronounced with setting 2

than with setting 0 or 1.

 With setting 1 or 2, if a long exposure is shot with the Live View image

displayed, “BUSY” will be displayed during the noise reduction process.

The Live View display will not appear until the noise reduction is

completed. (You cannot take another picture.)

Other manuals for Canon EOS Rebel T6

Questions and Answers:

Need help?

Do you have a question about the Canon EOS Rebel T6 and is the answer not in the manual?

General