Name: Canon EOS Rebel T6
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

298

If there is a problem with the camera, an

error message will appear. Follow the on-

screen instructions.

* If the error still persists, write down the error number and contact your

nearest Canon Service Center.

Error Codes

Number Error Message and Solution

Communications between the camera and lens is faulty. Clean the

lens contacts.

 Clean the electrical contacts on the camera and lens or use a

Canon lens (p.25, 26).

Card cannot be accessed. Reinsert/change card or format card

with camera.

 Remove and insert the card again, replace the card, or format the

card (p.36, 52).

Cannot save images because card is full. Replace card.

 Replace the card, erase unnecessary images, or format the card

(p.36, 52, 230).

The built-in flash could not be raised. Turn the camera off and on

again.

 Operate the power switch (p.39).

10, 20

30, 40

50, 60

70, 80

An error prevented shooting. Turn the camera off and on again or

re-install the battery.

 Operate the power switch, remove and install the battery again, or

use a Canon lens (p.36, 39).

Error number

Cause and countermeasures

Other manuals for Canon EOS Rebel T6

Questions and Answers:

Need help?

Do you have a question about the Canon EOS Rebel T6 and is the answer not in the manual?

General