Name: Canon EOS Rebel T6
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

274

With a commercially-available Eye-Fi card already set up, you can

automatically transfer captured images to a computer or upload them to

an online service via a wireless LAN.

The image transfer is a function of the Eye-Fi card. For instructions on

how to set up and use the Eye-Fi card or to troubleshoot any image

transfer problems, refer to the Eye-Fi card’s instruction manual or

contact the card manufacturer.

The camera is not guaranteed to support Eye-Fi card functions

(including wireless transfer). In case of a problem with an Eye-

Fi card, please check with the card manufacturer. Also note that

approval is required to use Eye-Fi cards in many countries or

regions. Without approval, use of the card is not permitted. If it

is unclear whether the card has been approved for use in your

area, please check with the card manufacturer.

Insert an Eye-Fi card (p.36).

Select [Eye-Fi settings].

 Under the [51] tab, select [Eye-Fi

settings], then press <0>.

 This menu is displayed only when an

Eye-Fi card is inserted into the

camera.

Enable Eye-Fi transmission.



Select [

Eye-Fi trans.

], then press <

 Select [Enable], then press <0>.

 If you set [Disable], there will be no

automatic transmission even with the

Eye-Fi card inserted (transmission

status icon I).

Display the connection information.

 Select [Connection info.], then press

<0>.

H Using Eye-Fi Cards

Other manuals for Canon EOS Rebel T6

Questions and Answers:

Need help?

Do you have a question about the Canon EOS Rebel T6 and is the answer not in the manual?

General