Canon EOS Rebel T6 User Manual

198
The built-in flash and external Speedlite settings can be set with the
camera’s menu. You can use the camera’s menu to set the external
Speedlite function settings only if an EX-series Speedlite compatible
with this function is attached.
The setting procedure is the same as when setting a camera menu
function.
Select [Flash control].
 Under the [z1] tab, select [Flash
control], then press <0>.
 The flash control screen will appear.
 Normally, set this to [Enable].
 If [Disable] is set, neither the built-
in flash nor the external Speedlite
will fire. This is useful when you want
to use only the flash’s AF-assist
beam.
3 Setting the FlashN
[Flash firing]
Even if [Flash firing] is set to [Disable], if focus is difficult to achieve in low
light, the built-in flash may still fire a series of flashes (AF-assist beam,
p.100).

Canon EOS Rebel T6 Specifications

General

Camera Type	Digital SLR
Sensor	CMOS
Effective Megapixels	18.0 MP
Sensor Size	22.3 x 14.9 mm
ISO Range	100-6400 (expandable to 12800)
Image Processor	DIGIC 4+
Autofocus Points	9
Continuous Shooting	3 fps
Viewfinder Type	Optical (pentamirror)
Viewfinder Coverage	95%
Screen Size	3.0 inches
Screen Resolution	920, 000 dots
Video Resolution	1920 x 1080 (Full HD)
Video Format	MOV (H.264)
Built-in Flash	Yes
Lens Mount	Canon EF/EF-S
Storage Media	SD/SDHC/SDXC
Connectivity	Wi-Fi, NFC
Battery	LP-E10
Battery Life	Approx. 500 shots
Shutter Speed	30-1/4000 sec
External Flash	Yes (Hot Shoe)
Dimensions	129.0 x 101.3 x 77.6 mm
Weight	485 g (body only)