Canon imagePROGRAF iPF765 Basic Guide

Error Message
Error Message
Messages regarding paper
Messages regarding paper
MediaType Mismatch ................................................................................................................................. 110
The paper is too small. ............................................................................................................................... 110
The paper is too small. ............................................................................................................................... 111
PaprWidth Mismatch ................................................................................................................................... 112
Paper size not detected. ............................................................................................................................. 112
Insufficient paper for job ............................................................................................................................. 113
This paper cannot be used. ........................................................................................................................ 113
Roll printing is selected. ............................................................................................................................. 113
Roll printing is selected, but sheets are loaded. ........................................................................................ 114
The roll is empty. ......................................................................................................................................... 114
Sheet printing is selected. .......................................................................................................................... 114
Regular printing is selected, but a roll is loaded. ....................................................................................... 115
Paper jam .................................................................................................................................................... 115
Paper is crooked. ........................................................................................................................................ 115
Paper not aligned with right guide. ............................................................................................................. 116
Cannot detect papr ..................................................................................................................................... 116
Paper cutting failed. .................................................................................................................................... 116
End of paper feed. ...................................................................................................................................... 117
Rel lever is in wrong position. ..................................................................................................................... 117
Borderless printng not possible. ................................................................................................................. 117
Paper position not suitable for borderless printing. .................................................................................... 118
Roll paper is not securely in contact with roll holder. ................................................................................. 118
MediaType Mismatch
MediaType Mismatch
Cause Corrective Action
When Detect Mismatch in the Control Panel
menu is set to Pause, the type of paper loa-
ded does not match the type specified in the
printer driver.
Follow these steps to ensure the paper type matches on the printer and in the printer
driver.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Either change the type of paper specified in the printer driver settings or replace the
loaded paper and change the paper type setting on the printer.
(See "unknown.") →User's Guide
(See "unknown.") →User's Guide
You tried to print a test pattern for printer ad-
justment on several sheets, but sheets of dif-
ferent types of paper were used.
When printing a test pattern for adjustment, use sheets of the same type of paper, in the
required quantity. Replace the paper as follows and perform adjustment again.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Replace the paper.
(See "unknown.") →User's Guide
3. Execute adjustment again from the control panel menu.
Press ▲ or ▼ to select Print, and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
When Detect Mismatch in the Control Panel
menu is set to Warning, the type of paper loa-
ded does not match the type specified in the
printer driver.
You can continue to print, but note that this error may cause problems in the printing re-
sults.
The paper is too small.
The paper is too small.
Cause Corrective Action
When Detect Mismatch in the Control Panel menu is
set to Pause or Hold Job, paper smaller than the size
specified in the printer driver is loaded.
Press ▲ or ▼ to select Print, and then press the OK button to resume printing.
MediaType Mismatch
iPF765
Basic Guide
Error Message Messages regarding paper
110

Canon imagePROGRAF iPF765 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Pigment matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Media thickness	0.8 mm
Maximum print size	-
Maximum roll length	18 m
Media width (rolls)	254 - 914.4 mm
Media width (sheets)	203.2 - 917 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1, A2, A3
ISO B-series sizes (B0...B9)	B1, B2, B4
Certification	CE, RoHS, ECO, WEEE
Storage media	HDD
Internal storage capacity	250 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	50 dB
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet interface type	Gigabit Ethernet
Sustainability certificates	ENERGY STAR
Power requirements	100 - 240V, 50/60Hz
Power consumption (standby)	5 W
Power consumption (typical)	140 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Compatible operating systems	Windows XP/Server 2003/Server 2008/Vista/7\\r Mac OS 10.5 - 10.7.x

Weight and Dimensions

Dimensions (WxDxH)	1304 x 1100 x 1062 mm