Reinstalling the Printer
Reinstalling the Printer
The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.
Assemble the stand
1
Referring to the Printer Stand Setup Guide, assem-
ble the Stand.
Caution
• The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself poses
a risk of injury or bending the Stand.
• When assembling the Stand, lock the casters.
•
Before moving the assembled stand, lift the sup-
port rod to the position shown (a) and unlock all
four casters. Moving the stand with the support
rod lowered or the casters locked may cause in-
jury or damage the area of installation or basket
cloth.
Install the printer
1
Mount the printer on the assembled Stand and
tighten the screws firmly.
iPF765
Reinstalling the Printer
Basic Guide
Printer Relocation Preparing to Transfer the Printer
63