30
Choose by pressing the COMPUTER button on the remote control unit.
1
2
3
When the Auto input function is set to On 1 or On
2 in the Auto setup function, the input signal will be
searched automatically (p.52).
COMPUTER
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select and then press the
Point ► or the OK button.
Use the Point ▲▼ buttons to select
COMPUTER and then press the OK button.
When COMPUTER is selected, press the
Point ► button to access the submenu
items. Use the Point ▲▼ buttons to select
the input source and then
press the OK button.
Direct Operation
Menu Operation
To Next Page
Loading...
Need help?
General
