Choose or
by pressing the COMPONENT or
the COMPUTER button on the remote control unit. Choose HDMI by pressing the HDMI button on the
remote controller.
1
2
Use the Point ▲▼ buttons to select
COMPUTER and then press the Point ►
button.
When the input source is coming
from video equipment connected
to the COMPUTER IN/S-VIDEO
IN/COMPONENT IN terminal
with a COMPONENT-VGA Cable,
select .
When the input source is coming
from video equipment connected
to the COMPUTER IN/S-VIDEO
IN/COMPONENT IN terminal
with a Scart-VGA Cable, select
.
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select and then press the Point ► or
the OK button.
When the Auto input function is set to On 1
or On 2, the input signal will be searched
automatically (p.52).
3
Use the Point ▲▼ buttons to select
or and then press the
OK button.
Direct Operation
Menu Operation
Press the Point ▲▼ buttons to
select or.
When video input signal is
connected to the HDMI jack,
select HDMI.
HDMI
To Next Page
Loading...
Need help?
General
