1
2
If the projector cannot reproduce proper video
image, select a specific broadcast signal format
from among PAL, , , ,
and .
The projector automatically detects an
incoming video signal, and adjusts itself to
optimize its performance.
If the projector cannot reproduce proper video
image, select a specific component video signal
format from among , 575i, , ,
, 1035i and .
The projector automatically detects an
incoming video system, and adjusts itself
to optimize its performance. When VIDEO
System is or , select the system
manually.
The AV System Menu cannot be selected when
selecting .
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select and then press the
Point ► or the OK button.
Select VIDEO,
or input
source. (pp. 41-42)
3
Use the Point ▲▼ buttons to select
and then press the Point ► or
the OK button. Use the Point ▲▼ buttons
to select the desired system and then
press the OK button.
To Next Page
Loading...
Need help?
General
