Select the desired image mode among
, , ,
, , ,
User 1, User 2, User 3 and User 4 by pressing
the IMAGE button on the remote control unit.
Picture mode with improved halftone for
graphics.
For the image projected on a blackboard.
This mode helps enhance the image projected
on a blackboard. This is mainly effective on a
green colored board, not truly effective on a
black colored board.
Direct Operation
For viewing pictures in a bright room.
Normal picture mode preset on the projector.
For viewing with the user preset image mode in
the Image Adjust Menu (p. 46).
1
2
Menu Operation
At the time of simple projection on the colored
wall, you can get the close color image to the
color image projected on a white screen by
selecting the similar color to the wall color from
the preset four colors.
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to selectand then
press the Point ► or the OK button.
Use the Point ▲▼ buttons to select the
desired item and then press the OK button.
Picture mode adjusted with fine tone.
User 1
User 2
User 3
User 4
Use the Point ▲▼ buttons to select
and then press the Point ► or the
OK button to access the submenu. Press the
Point ▲▼ buttons to select items among Red,
Blue, Yellow and Green.
To Next Page
Loading...
Need help?
General
