1781
Using the Lenses (Sold Separately)
The camera supports use of the separately sold Wide Converter WC-
DC52, Tete-converter TC-DC52A and Close-up Lens 250D (52mm). tn
order to attach these lenses, you also need to use the separately sold
Conversion Lens Adapter LA-DC52G.
o hen attaching the wide converter, tele-converter or close_
Uplens be sure to screw it on securely. If they come loose,
they may fall from the lens adapter, posing risk of injury from
shattered glas&
• Never look into the sun or into strong light th[ough the wide
converter, tele-converter or close-up !ens as this can result
in b!indness 0r impairment Of visi0n.
O o If you use the flash when shooting with these attachments,
the outer area of the recorded image (especially lower right
corner) will come out relatively dark.
• When using the tele-converter, set the camera to maximum
telephoto. At other zoom settings, the image will appear as if
its corners have been cut off.
• When using the wide converter, please set the camera to
maximum wide angle.
• If you use the viewfinder for shooting, a portion of the view
will be blocked by these attachments. Please use the LCD
monitor.
• Wide Converter WC-DC52
Use this converter for taking wide-angle shots. The wide converter
changes the focal length of the camera body's lens by a factor of 0.7x
(the thread diameter is 52 mm).
• Tele-converter TC-DC52A
This lens isused for taking telephoto shots. The lens changes the focal
length of the camera body's lens by a factor of 1.75x (the thread
diameter is 52 mm).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
