83
Changing Movie Recording Pixels/Frame Rates
You can change the recording pixels and frame rate when the movie
mode is set to [] (Standard). The frame rate can be set depending
on the recording pixels.
1 Select the recording
pixels.
1. Press the _ button.
2. Use the 4, or _1, button to select
[] and the ÷ or ,_ button to
change the recording pixels.
3. Press the _ button.
Movie Recording Pixels and Frame Rates
Frame rates indicate the number of frames recorded or played back
each second. The higher the frame rate, the smoother the
appearance of motion.
[].1 1640 ×480 recording pixels, 20 frames/sec.
[] Standard [].2 640 ×480 recording pixels, 20 frames/sec. LP
[] 320 × 240 recording pixels, 30 frames/sec.
[] Compact [] 160 × 120 recording pixels, 15frames/sec.
"1 Default setting.
*2 When priority is on movie length rather than image quality, select []. You can
shoot for twice as long in this mode compared to a file of the same size shot in the
other modes.
.................e See Memo_ Cards and Estimated Capacities (p. 193).
[_]e See Image Data Sizes (Estimated) (p. 193)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
