2.
Removing the Film
The film advance lever locks at
the
end
of the film. When this
occurs,
the num-
ber of completed exposures indicated on
the frame
counter
should equal
or
slight-
ly exceed the
number
of
exposures list-
ed on the film
package
. Rewind and
remove the film as follows.
1)
Press the rewind button.
• The rewind button locks in place af-
ter it is pressed in.
2)
Lift the rewind crank and turn it clock-
wise to rewind the film. When the ten-
sion of the rewind
crank
loosens
suddenly, rewinding is
completed
.
Stop turning
the
rewind crank.
3)
Pull the rewind crank knob up to open
the
back
cover
and remove the film.
Avoid
direct
sunlight when unloading
film. Unload film indoors or in a shad-
ed area.