3-22
Performing Operations and Settings as the Administrator
Displaying the Motion Detection Status
You can display the detection status of the motion detection function.
Example:
Areas 1 to 3: Detection status OFF
Area 4: Detection status ON
Controlling/Setting the Camera
Click the applicable camera control buttons to perform zoom operation and set the speed of each
operation.
(1) Zoom in/out buttons
You can zoom in to/out of the displayed image. Press and hold a button, and the camera will
zoom continuously. Release the button, and the camera will stop.
Tip
Set the motion detection options beforehand using "Motion Detection Setting Tool" of
VBAdmin Tools ( P. 2-7).
Tip
Even when the [Zoom] speed setting is changed, the speed of zoom operation performed
using the scroll bar will not change.
To Next Page
Loading...
Need help?
General
