5-2
Modifiers
You can specify parameters using the "% characters" explained below.
%n
Reason for capture
(number)
0 (Test) | 1 (Contact input 1) | 2 (Contact input 2) |
33 (Interval timer) |
130 (Motion detection [Area 1]) | 131 (Motion detection [Area 2]) |
132 (Motion detection [Area 3]) | 133 (Motion detection [Area 4])
%N
Reason for capture
(character string)
<External device input name (single-byte alphanumerics)> | <Motion detection
area name (1/2/3//4)> |
NULL (Null character/interval timer test)
%X Width of image Number of pixels in horizontal direction
%Y Height of image Number of pixels in vertical direction
%C Camera number 1
%D Camera name Setting for [Camera Name (alphanumeric characters)]
%Z Zoom position 38 ~ 152
%V Camera server VB-C500VD/VB-C500D
%y Year of capture time 2001 ~ 2031
%m Month of capture time 1 ~ 12
%d Day of capture time 1 ~ 31
%w
Day of week of
capture time
0 ~ 6 (Sunday through Saturday)
%H Hours of capture time 00 ~ 23
%M
Minutes of capture
time
00 ~ 59
%S
Seconds of capture
time
00 ~ 59
%s
Milliseconds of
capture time
000 ~ 999
%z
Time zone of capture
time
-1200 ~ +1300
To Next Page
Loading...
Need help?
General
