24
Adjusting the Viewfinder
You can adjust the brightness, contrast, color and sharpness of the viewfinder. These adjustments will
not affect your recordings.
1. Press the MENU button.
2. Turn the SELECT dial to select [DISPLAY SETUP/ ] and press the SET button.
3. Select [EVF SETUP] and then select [BRIGHTNESS], [CONTRAST], [COLOR] or
[SHARPNESS].
4. Adjust the setting with the SELECT dial and press the SET button.
• After the adjustment you will return to the [EVF SETUP] submenu. Change additional settings in the
same way.
• For more details regarding the [EVF BW MODE] setting refer to page 81.
5. Press the MENU button to close the menu.
Using the Viewfinder as LCD Panel
You can use the viewfinder as an LCD panel by opening the eyepiece adapter.
Press the lock release button and open the
eyepiece adapter.
Make sure to close the eyepiece adapter when you are not using the viewfinder as an LCD panel.
The screen is slightly brighter when you open the eyepiece adapter.
MENU
( 33)
DISPLAY SETUP / EVF SETUP EVF BW MODE
•••
OFF
BRIGHTNESS
•••
0
CONTRAST
•••••
0
COLOR
••••••••
0
SHARPNESS
••••
2
COPY
To Next Page
Loading...
Need help?
General
