49
Recording
Using the ND Filter
(lenses with built-in ND filter)
When recording in bright surroundings, the
camcorder will set a small aperture value and the
picture may appear blurred. When using a lens with a
built-in ND filter, turn the ND filter on/off according to
the screen display.
With the HD 20x L IS III lens: Press the ND
filter unlock button and turn the ND filter
operating ring.
When using a recording program other than M Manual and if the GAIN dial is set to A, the following displays
appear:
1
Displayed only when using lenses with built-in ND filter.
2
If you have no external ND filter available, use the Tv mode and set a faster shutter speed, or use the Av mode and set
a small aperture value.
Depending on the scene, the color may change when turning the ND filter on/off. Setting a custom
white balance may be effective in such case ( 72).
Screen display What it means What you should do
No display ND filter is not activated –
“ND” ND filter is activated
1
–
“ND ” flashes ND filter required Turn on the ND filter
ND “ ” flashes Lenses with single-density ND filters (ON/OFF):
External ND filter required.
Lenses with selectable ND filter density: Higher
density setting or external ND filter required.
Set the ND filter to a higher density setting or
attach an external ND filter to the lens
2
ND “ ” flashes Built-in ND filter not required Turn off the ND filter
“ND” flashes in red Incorrect setting of the built-in ND filter Set the ND filter to an appropriate density
ND filter unlock button
ND filter operating ring
COPY
To Next Page
Loading...
Need help?
General
