EasyManuals Logo
Home>Casio>Watch>3515

Casio 3515 User Manual

Casio 3515
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
Setting the Swimming Pool
Length
Specifying a pool length helps when
measuring lap times.
1. Display the current time screen.
l
Watch Mode
2. Press (C).
This enters the Activity Mode.
3. Use (A) and (D) to select [POOL
SWIMMING].
4. Press (C).
5. Hold down (A) for at least two seconds.
This displays the pool swimming setting
screen.
Pointer
6. Use (A) and (D) to move the pointer to
[POOL LENGTH].
7. Press (C).
This displays the pool length setting
screen.
Pointer
8. Use (A) and (D) to select the pool length
you want.
[25m] 25 meters
[50m] 50 meters
[25yd] 25 yards
[50yd] 50 yards
9. Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the pool swimming setting
screen re-appears.
Note
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Enabling Auto Pause
While Auto Pause is enabled, timing will pause
whenever you stop running.
Note
When a measurement operation is
restarted from auto pause, the watch
display will be delayed from the actual
start, but the time and distance being
measured are not affected.
For RUNNING and WALKING, Auto
Pause becomes difficult to work while
the GPS reception interval is [OFF] or
if the GPS signal is lost.
For BIKING, Auto Pause does not work
while the GPS reception interval is set
to [LONG] or [OFF], or if the GPS signal
is lost.
l
Changing the GPS Receive
Interval
If auto pause does not work after it is
enabled or if measurement does not
resume, pause and resume
measurement manually.
1. Display the current time screen.
l
Watch Mode
2. Press (C).
This enters the Activity Mode.
Example:
3. Use (A) and (D) to select an activity.
4. Press (C).
For activities that can be measured
without receiving GPS signals, this
operation returns to the measurement
operation ready screen. In this case,
advance to step 6.
If you selected an activity that receives
GPS signals for measurement, this
operation starts the GPS signal receive
operation.
Watch Operation Guide 3515
68

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio 3515 and is the answer not in the manual?

Casio 3515 Specifications

General IconGeneral
BrandCasio
Model3515
CategoryWatch
LanguageEnglish

Related product manuals