Configuring Settings
EN-58
• Turning power off and back on again returns tone and other settings to their initial defaults
(page EN-13).
• The settings below are retained even when power is turned off.
– MIDI OUT Channel (main part, layer part)
– Bluetooth
– MY SETUP power on recall
– Auto Power Off
– Battery type
1.
While holding down FUNCTION, long press the F{6 keyboard key.
This sounds a notification tone and prepares for initialization.
• While continuing to hold down FUNCTION, release the F{6 keyboard key.
2.
With FUNCTION still held down, press the F{6 keyboard key again.
This sounds a notification tone and executes initialization. Then the Digital Keyboard will restart.
3.
Release FUNCTION to complete the setting operation.
el
Notification tone Off, On
(Initial Default:
On)
When this setting is
disabled, a tone does
not sound when a
keyboard key is pressed
while holding down
FUNCTION.
Returning Settings to Their Initial Factory Defaults
Item Setting Options Description Remarks
C7
F{6
To Next Page
Loading...
Need help?
General
