175
Other Settings (SETTING)
Procedure
[MENU] * “¥ SETTING” Tab * Sleep
This feature turns off the monitor screen and lights the back lamp (green) whenever
no camera operation is performed for a preset period of time. Press any button to turn
the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is
selected.)
• Sleep is disabled under any of the following conditions.
– In the PLAY mode
– While the camera is connected to a computer, TV, or other device
– During movie recording and playback
– During Remote Capture
• When both sleep and Auto Power Off are turned on, Auto Power Off takes priority.
Procedure
[MENU] * “¥ SETTING” Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for
a preset amount of time.
Trigger Time Settings: 2 min, 5 min, 10 min (The trigger time is always 5 minutes in
the PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During CS group playback
– During Time Lapse recording
– During movie recording and playback
– During Remote Capture
Configuring Sleep State Settings (Sleep)
Configuring Auto Power Off Settings (Auto Power Off)
To Next Page
Loading...
Need help?
General
