19
Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-160)
for power. Never try to use any other type of battery.
1. Open the battery cover.
2. Load the battery.
With the CASIO logo on the battery
facing upwards (in the direction of
the lens), hold the stopper next to
the battery in the direction
indicated by the arrow as you slide
the battery into the camera. Press
the battery in until the stopper
secures it in place.
3. Close the battery cover.
First, charge the battery prior to use.
To load the battery
CASIO logo
Stopper
Battery
OK
NG
To Next Page
Loading...
Need help?
General
