135
ADVANCED SETTINGS
IMPORTANT!
• The icons listed below do not appear on the display while
icon help is turned off.
– Focus mode icon (page 109)
– White balance icon (page 120)
Using Mode Memory to Configure Power
On Default Settings
You can configure the camera so it saves certain settings in
“mode memory” whenever it is turned off, and restores the
settings the next time you turn the camera back on. This keeps
you from having to configure the camera each time you turn it off
and on.
Selecting “Off” for a setting will cause that setting to return to its
optimal default whenever the camera is turned off and then back
on again. Selecting “On” will cause its setting when power is
turned off to be restored when the camera is turned back on
again.
The following lists all of the settings that can be configured with
mode memory. The ones marked with an asterisk (*) have mode
memory turned on (that is, their current setting is saved when
the camera is turned off and restored when the camera is turned
back on) as the initial factory default setting.
BEST SHOT, Flash*, Focus, White Balance, ISO, AF Area*,
Metering, Self-timer, Flash Intensity, Digital Zoom*, MF Position,
Zoom Position
AWB
To Next Page
Loading...
Need help?
General
